BLANC FIXE - BASO4 Titanium Dioxide Pigments Nano Titanium Dioxide
PTFE micro powder AW-321
The product:
Fluoro additive AW-321 is a white free flowing PTFE powder specialized for use as an additive to
impart low surface energy and other fluoropolymer attributes. AW-321 is well suited for added in inks and coatings where a narrow particle size distribution is desired. With plastics and rubbers, it could improve lubricity and wear resistance. Added to lubricants, it can enhance performance under severe conditions. AW-321 can be used at temperature from -190℃ to 250℃(-310℉ to 480℉).
AW-321 is generally designed to be used as an additive, although it can also be used alone as a dry lubricant. It is unsuitable to be used as a molding or extrusion resin to replace for any of the high molecular weight PTFE resin. AW-321 is inert to all chemicals and solvents. It is a good electrical insulator, dose not absorb water, and is highly resistant to weathering.
Packing:
AW-321 is packaged in 25-kg/ carton. 9,18,27 cartons are packaged on one pallet f or easy shipping, handling and storage.
Transportation& Storage:
Before using AW-321 please read the Material Safety Data Sheet(MSDS-available from Fulcrum)
carefully. Open and use containers only in well-ventilated areas using local exhaust ventilation. Vapor and fumes liberated during hot processing, or from smoking tobacco or cigarettes contaminated with AW-321, may cause flu-like symptoms(chill, fever, sore throat). Vapor and fumes liberated during hot processing should be exhausted completely from work area. Contamination of
tobacco with AW-321 should be avoided. Mixtures with some finely divided metals, such as magnesium or aluminum, can be flammable or explosive under some conditions.
Applications:
AW-321 is used as an additive (at approximately 1-3% by weight) in printing inks to improve certain properties, such as rub resistance, slip, surface smoothness and gloss. It can also reduce the “blocking”. Typically, AW-321 is used in combination with polyethylene waxes to get the property modification. Due to its small particle size and narrow particle size distribution, AW-321 can be use in a variety of coating system to improve nonstick, anti friction, corrosion inhibition properties. It can also reduce the friction coefficient and increase the rub resistance. Plastics and elastomers containing AW-321 have shown improved lubricity and reduced friction and wear. Typical loadings of 5-20% by weight were used.
*All information is based on data obtained from the manufacturer or recognized technical sources. The information is believed to be accurate. We make no representation or warranty, express, or implied, concerning the accuracy or sufficiency of the information. We are not liable for any damages resulting from the use of the information.